4. aSSembly
4.1.
The initial assembly is easier if carried out with cabinet horizontal. Lay a soft mat or similar on the floor to protect the paint finish.
4.2.
Attach the four metal feet to the bottom panel using 16pcs of M6X12mm cross head bolt, fig.1.
4.3.
Screw four adjustable feet into the bottom panel, fig.1.
4.4.
Lay down the two back panels on their backs with a soft mat underneath, fig.2.
4.5.
Attach the right back panel and left back panel by sliding the left back panel’s edge into the groove of the right back panel, fig.2.
4.6.
Attach the left side panel to the left back panel by sliding the left side panel’s edge into the groove of the left back panel. Repeat the
same procedure to attach the right side panel to the right back panel, fig.3.
4.7.
Attach the bottom panel to the side panels. Tighten securely with 6pcs of M6X12mm cross head bolt in the front of the side panels,
fig.4.
fig.1
fig.3
fig.2
fig.4
APMS05.V2 | Issue 1 09/02/17
Original Language Version
© Jack sealey limited
