background image

instructions for

modular full height floor cabinet 930mm 

heavy duty

model no: 

aPmS05.v2

thank you for purchasing a Sealey product. manufactured to a high standard, this product will, if used according to these instructions, 

and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  Safety

 

‰

  

Warning!

 ensure Health & safety, local authority, and general workshop practice regulations are adhered to when using this cabinet.

 

9

   locate cabinet in a suitable work area. 

 

9

   Keep the work area clean, uncluttered and ensure there is adequate lighting.

 

‰

  

Warning!

 use cabinet on level and solid ground, preferably concrete.

 

9

   Keep the cabinet clean and tidy in accordance with good workshop practice.

 

9

   Keep children and unauthorised persons away from the work area.

 

8

  

do not

 use the cabinet for any purpose other than that for which it is designed.

 

8

  

do not

 use the cabinet outdoors.

 

8

  

do not

 place the cabinet in a damp or wet location or an area where there is condensation.  

 

8

  

do not

 clean the cabinet with any solvents which may damage the surfaces or the protective coating.

8

8

88

do not 

move the cabinet when there are items placed inside.

8

8

88

do not 

step on the shelves.

8

8

88

do not

8

overload the cabinet.

2.  introduction

• Use as part of a complete professional garage storage system or as an individual storage unit.

• All steel construction with a graphite powder coat finish.

• Heavy-duty full height 2 door cabinet.

• 3 Adjustable shelves.

• 4 Level-adjusting feet.

• Added security provided by cylinder lock, supplied with two keys.

• Overall measurements (W x D x H): 930 x 610 x 2110mm.

3.  contentS

APMS05.V2 | Issue 1 09/02/17

Original Language Version

© Jack sealey limited

refer to

instructions

no. description

Quantity

1

top panel

1

2

left back panel

1

3

m

6 x 12 cross head bolt 44

4

right back panel

1

5

right side panel

1

6

shelf

3

7

door handle

2

8

shelf support

12

9

bottom panel

1

10

Adjustable feet

4

11

metal feet

4

12

lock

1

13

right door

1

14

skirting board

1

15

m

4 x 8 crosshead bolt

4

16

left door

1

17

left side panel

1

Summary of Contents for APMS05.V2

Page 1: ... the work area 8 8 DO NOT use the cabinet for any purpose other than that for which it is designed 8 8 DO NOT use the cabinet outdoors 8 8 DO NOT place the cabinet in a damp or wet location or an area where there is condensation 8 8 DO NOT clean the cabinet with any solvents which may damage the surfaces or the protective coating 8 8 DO NOT move the cabinet when there are items placed inside 8 8 D...

Page 2: ...4 5 Attach the right back panel and left back panel by sliding the left back panel s edge into the groove of the right back panel fig 2 4 6 Attach the left side panel to the left back panel by sliding the left side panel s edge into the groove of the left back panel Repeat the same procedure to attach the right side panel to the right back panel fig 3 4 7 Attach the bottom panel to the side panels...

Page 3: ...onto the appropriate set of shelf supports Press the shelf firmly until locked onto the shelf support fig 7 4 14 The shelves can be adjusted at any time by lifting them off and repositioning fig 7 4 15 The doors have a pin at the bottom and a spring bolt at the top To fit the doors drop the pin into the hole in the front of the base and then pull the bolt until it locates in the hole in the top ra...

Page 4: ...Suffolk IP32 7AR www sealey co uk sales sealey co uk 01284 757500 01284 703534 Web Fig 10 Environmental Protection Recycle unwanted materials instead of disposing of them as waste All tools accessories and packaging should be sorted taken to a recycling centre and disposed of in a manner which is compatible with the environment When the product becomes completely unserviceable and requires disposa...

Reviews: