4. ASSEMBLY & INSTALLATION
4.1.
These units are heavy, obtain the help of at least one other person before attempting to unpack and move them.
4.2.
Attach the wheels to the bottom of the rollcab using 4 bolts and washers per wheel. The braked swivel wheels should be mounted on
the same end as the side mounted handle (left hand side, fig.1).
4.3.
Mount the side mounted handle onto the cabinet and attach with 4 bolts and washers (fig.3).
4.4.
To remove a drawer with roller sliders, pull the drawer out completely, press down the left tab and lift up the right tab, pull the drawer
off the slides (fig.2). To reinstall the drawer, realign with the internal drawer slide and push until it locks in place.
IMPORTANT:
To avoid tipping, open one drawer at a time and close and secure all drawers whilst moving the topchest/rollcab.
5.
MAINTENANCE
5.1.
Periodically lubricate castors and tighten all hardware.
5.2.
Clean the surfaces with a soft cloth and a mild water/detergent sol
ution.
.
fig.1
Original Language Version
© Jack Sealey Limited
fig.2
fig.3
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on [email protected] or 01284 757505.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
AP3503TB.V2, AP3505TB.V2, AP3508TB.V2 Issue: 1 (14/01/22
