4.1.
These units are heavy, obtain the help of at least one other person before attempting to unpack them.
(AP26479TC)
4.2.
Attach the wheels to the bottom of the rollcab using 4 bolts, washers and spacers (if supplied) per wheel.
The braked swivel wheels should be mounted on the same end as the handle (left hand side, fig.1).
4.3.
Mount the side mounted handle onto the cabinet and attach with 4 bolts and washers (fig.3).
(All units)
4.4.
AP26059TC or AP26029TC can be placed on top of AP26479TC, alternatively all 3 units can be assembled
together as in the picture below.
4.5.
To remove a drawer with roller sliders, pull the drawer completely out, press down the left tab and lift up the right tab, pull
drawer off the slides (fig.2). To reinstall the drawer, realign with the internal drawer slide and push until it locks in place.
IMPORTANT:
To avoid tipping, open one drawer at a time and close and secure all drawers whilst moving the rollcab/
units.
4.6.
Periodically lubricate wheel axles and tighten all nuts and bolts.
Fig.1
Fig.2
Fig.3
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
Parts support is available for this product. To obtain a listing and/or diagram, please log on to: www.sealey.co.uk,
email: [email protected] or phone: 01284 757500
5. ASSEMBLY
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Original Language Version
© Jack Sealey Limited
AP26059TC, 26479TC, 26029TC Issue: 1- 15/07/15