INSTRUCTIONS FOR:
TOPCHEST/ROLLCAB/MID-BOX
WITH BALL BEARING RUNNERS - BLUE
MODEL No'
s:
AP26059TC/AP26479TC/AP26029TC
1.1. GENERAL SAFETY
WARNING!
Ensure Health & Safety, local authority, and
general workshop practice regulations are adhered to when
using these units.
Locate the units in a suitable work area.
Keep the work area clean, uncluttered and ensure there is
adequate lighting.
WARNING!
Use the Rollcab on level and solid ground,
preferably concrete.
Keep the units clean and tidy in accordance with good
workshop practice.
Keep children and unauthorised persons away from the work
area.
DO NOT
use these units for any purpose other than that
for which they are designed.
DO NOT
use the units outdoors.
DO NOT
place the units in a damp or wet location or an
area where there is condensation.
DO NOT
clean the units with any solvents which may
damage the surfaces or the protective coating.
DO NOT
move the units with the drawers out. To avoid
tipping, open one drawer at a time and close and secure all
drawers whilst moving.
DO NOT
step on the drawers.
DO NOT
overload the drawers, weight limit per drawer is
36kg.
•
All designed to take our modular tool trays.
•
All heavy gauged steel construction and manufactured with
steel inner walls for extra strength and durability.
•
Heavy-duty 45mm ball bearing drawer runners provide superior
performance and carry heavier loads.
•
Full height rear locking mechanism, locks full-length drawers in
multiple locations.
•
Added security provided by tumbler locks, supplied with two
folding keys.
•
Rust and solvent resistant powder coat paint finish.
•
The rollcab is fitted with four Ø125mm rubber wheels, two
swivel castors with large toe locks and two fixed wheels.
•
Topchest features heavy-duty side handles.
•
Rollcab features a high, polished chrome handle for comfort
and control when manoeuvring.
•
Rollcab supplied with a 6mm thick top mat to protect top
surface from scratching.
•
Drawers feature stylish aluminium drawer pulls and non-slip
liners.
Model No.
AP26479TC
AP26059TC
AP26029TC
Overall Size W x D x H (mm):
685 x 465 x 995mm
660 x 435 x 490mm
670x 440 x 210mm
Medium Drawer (x5):
533 x 398 x 60mm
533 x 398 x 60mm
(2x) 533 x 398 x 60mm
Large Drawer (x2):
533 x 398 x 160mm
Original Language Version
AP26059TC, 26479TC, 26029TC Issue: 1- 15/07/15
© Jack Sealey Limited
AP26479TC
AP26059TC
AP26029TC
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1. SAFETY
2. INTRODUCTION
3. SPECIFICATION
