5. OPERATION
5.1.
Prime unit by operating handle slowly until grease emerges from end of hydraulic connector (fig 1 - 7), (approx 20-25 operations).
WARNING!
DO NOT
allow uncontrolled discharge of grease thus polluting the environment.
5.2.
When fully primed a slight resistance will be felt on the pump down stroke indicating the pump is ready for use.
6. MAINTENANCE
Before each use inspect the overall condition of the pump for broken, cracked or bent parts that may effect the proper operation.
A
K455.V2 Issue 1 01/02/21
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on [email protected] or 01284 757505.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
fig.2
fig.1
