fig. 6
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this product.
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
Original Language Version
AK433.V2 Issue: 1 - 22/02/12
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste.
All tools, accessories and packaging should be sorted, taken to a
recycle centre and disposed of in a manner which is compatible with
the environment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. Contact your local solid waste
authority for recycling information.
Battery Removal
WARNING!
To avoid electric shock, ensure the battery is
exhausted before removing.
Press the switch to the off position '
1.
O
' (fig.1A).
Twist the reflector assembly (fig.3B) anti-clockwise, and pull away
2.
from the casing.
With the reflector assembly removed, separate the wires by
3.
unclipping the connector (fig.4A).
Remove all the screw holding the two parts of the casing together,
4.
using a phillips screwdriver (fig.3A).
To split the casing push down and pull apart the two tabs. (see
5.
fig.4B).
Cut the wires connecting to the battery, cut the negative black wire
6.
first.
Dispose of batteries according to local authority guidelines
.
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey
Ltd are required to inform potential purchasers of products containing batteries
(as defined within these regulations), that they are registered with Valpak’s
registered compliance scheme. Jack Sealey Ltd’s Batteries Producer
Registration Number (BPRN) is BPRN00705.
4. OPERATION
fig.2
fig.3
fig.4
WARNING! Ensure that you read and understand the Section 1 safety
instructions before use.
4.1. SWITCHING ON
4.1.1. Charge the battery before first use, see Section 3.
4.1.2. Turn the lantern on by pressing the rocker switch (fig.1A)
- '
I
' for main torch, which will give 3hrs use from a full charge.
- '
II
' for the side tube LED, which will give 24hrs use from a full charge.
4.1.3. Turn off the lantern by pressing the switch to '
O
'.
4.2. HANDLE ORIENTATION
4.2.1. Press the handle button (fig.2A).
4.2.2. While holding the button pull the handle away from the lantern.
4.2.3. Release the button and the handle should click into place at the end of its
travel. (fig.2B).
