3.1 Filling.
(Refer to fig.1)
3.1.1. Use standard butane fuel. Fill in a well ventilated area away from open flame. Turn the torch off, make sure the flame is extinguished,
allow to cool down for five minutes before filling.
3.1.2. Hold torch upside down and insert the filling can’s nozzle into the gas filling valve. Press nozzle into the valve and release gas. Once gas
begins to seep out around the edge of the nozzle, the gas tank is full. Remove the filling can.
3.2
Operation
(Refer to fig.1)
3.2.1. Slide safety lock down.
3.2.2. Press the trigger to ignite, release the trigger to extinguish the flame.
3.2.3. Slide the trigger lock up after ignition to keep a continuous burning flame, without holding down the trigger. Slide the lock down to
extinguish the flame.
3.2.4. Move flame size control (fig.2) to vary flame strength, + to increase, - to decrease.
Note
: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important
: No Liability is accepted for incorrect use of this product.
Warranty
: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
