Sealey ADB300, Instructions, Page: 2 / 2

3. OPERATION
4. MAINTENANCE
2. INTRODUCTION AND SPECIFICATIONS
ADB300, ADB3000 - 1 - 190106
Model No: . . . . . . . . . . . . . . . . . . . .ADB300 . . . . . . . . . . . . .ADB3000
Maximum Airflow:
. . . . . . . . . . . .10mtr
3
/min . . . . . . . . . . . .81mtr
3
/min
Speeds: . . . . . . . . . . . . . . . . . . . . . 1275rpm . . . . . . 940/1210/1370rpm
Supply: . . . . . . . . . . . . . . . . . . . . 230V 50Hz . . . . . . . . . . . . 230V 50Hz
Motor Power: . . . . . . . . . . . . . . . . . . . . 96W . . . . . . . . . . . . . . . 1130W
Current: . . . . . . . . . . . . . . . . . . . . . . . .0.5A . . . . . . . . . . . . . . . . .5.0A
Length/Width/Height: . . . . .300/240/300mm . . . . . . . .450/350/410mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . 3.7kg . . . . . . . . . . . . . . .10.2kg
Robust, composite housing, carefully balanced and fully guarded blade drum provide quiet and safe operation. Housing design provides four out-
let positions from horizontal to vertical, allowing precise direction of airflow for cooling or drying. Handle incorporates cable stowage. Suitable for
indoor and outdoor use in industrial, commercial, agricultural and automotive workshops.
5. DECLARATION OF CONFORMITY
Declaration of Conformity
We, the sole importer into the UK, declare that the products listed here are in conformity with the following standards and directives.
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
19th January 2006
Air Dryer/Blowers
ADB300, ADB3000
73/23/EEC Low Voltage Directive
89/336/EEC EMC Directive
93/68/EEC CE Marking Directive
Signed by Steve Buckle
The construction files for these products are held by the Manufacturer and may be inspected, by a
national authority, upon request to Jack Sealey Ltd.
01284 757500
01284 703534
sales@sealey.co.uk
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web
email
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our catalogue and latest promotions call us on 01284 757525 and leave your full name, address and postcode.
!
WARNING! Ensure you read, understand and apply safety instructions before using the blower.
3.1. Lift by the handle on the main body of the blower and manouvre it into position. Use in any of the 4 positions illustated below. Ensure that there is
nothing in front of the blower that may be disturbed when the blower is switched on.
3.2. Check that the switch situated in the recess in the rear grille of the blower is set to “0” (OFF). Uncoil the power lead from its stowage
position and plug into the mains power supply. Ensure that the power lead is not stretched or positioned in such a way as to cause a hazard.
3.3. Turn the blower on by switching from “0” (OFF) to “I”. If a greater air flow is required turn the knob to the “II” or “III” setting (ADB3000 only).
3.4. When you have finished using the blower ensure you switch to “0” (OFF) and disconnect from mains power.
3.5. Rewind the lead around the lugs on the carrying handle.
3.6. When not in use place the blower in its original box, or otherwise protect it from dust, and store in a safe, dry, childproof location.
!
WARNING! Ensure the blower is disconnected from the mains power supply before attempting any of the following:
4.1. Use a soft, damp cloth to clean the body of the blower. Do not splash with water and never allow water to drip onto the motor housing.
DO NOT use solvents, petroleum, paint thinner or other chemicals to clean the blower.
4.2. If it becomes necessary to clean the blades or inside the body, remove the rear grille (opposite side to the motor) by undoing the screws.
Wipe with a damp cloth only. Replace the grille and re-fix using the screws.
4.3. Should the motor, speed control box or the power lead require service or maintenance contact your local service agent.