6.
MAINTENANCE
!
IMPORTANT: Only fully qualified personnel should attempt maintenance or repair.
6.1
When the jack is not in use, the saddle must be in the lowest position to minimise ram and piston corrosion.
6.2
Keep the jack clean and wipe off any oil or grease. lubricate all moving parts with acid free oil.
6.3
The oil cylinder is a sealed unit and must not be accessed. For service contact your authorised dealer.
!
WARNING! Only a good quality Jack oil, such as SEALEY HYDRAULIC JACK OIL must be used. DO NOT use brake fluid.
6.4
Before each use, follow the pre-use check list to ensure components are not damaged, malfunctioning or missing. Refer to Section 4.
If any suspect item is found remove jack from service and take necessary action to remedy the problem.
DO NOT
use the jack if believed to have been subjected to abnormal load or shock. Inspect and take appropriate action.
6.5
Periodically check the pump piston and piston rod for signs of corrosion. Clean exposed areas with a clean oiled cloth.
6.6
Should the jack become completely unserviceable and require disposal, draw off the oil into an approved container and dispose of the
jack and oil in accordance with local regulations.
!
IMPORTANT: No responsibility is accepted for the incorrect use of the jack.
DO NOT RETURN THE JACK TO US.
Please telephone us on 01284 757500 to obtain the address and ‘phone number number of your local agent. If the jack is under guarantee
you can also contact your local dealer.
7.
TROUBLESHOOTING
IMPORTANT:
Although the following may identify a problem, in most cases the problem must be resolved by your authorised service agent.
PROBLEM
CAUSE
SOLUTION
Jack will not lift
Jack will only lift halfway
Raised load will not hold
Poor lifting
No hydraulic oil, or defective suction valve or delivery valve
Release valve is open
Hydraulic oil low, or excess of hydraulic oil
Defective valves, or defective piston packing
Defective plunger packing
Contact authorised service agent.
Close release valve.
Contact authorised service agent.
Contact authorised service agent.
Contact authorised service agent.
Declaration of Conformity
We, the sole importer into the UK, declare that the product listed below is in conformity with the following
standards and directives.
For Jack Sealey Ltd., Sole importer into the UK of Sealey Quality Machinery.
Telescopic Transmission Jack
Model 1250GTA
98/37/EC Machinery Directive
93/68/EEC CE Marking Directive
25th April 2006
Signed by Mark Sweetman
1250GTA - (2) - 250406
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT:
No liability is accepted for incorrect use of this equipment
WARRANTY:
Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION:
For a copy of our latest catalogue and promotions, call us on 01284 757525 and leave your full name and address, including postcode.
8.
DECLARATION OF CONFORMITY
The construction file for this product is held by the Manufacturer and may be
inspected, by a national authority, upon request to Jack Sealey Ltd.
01284 757500
01284 703534
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
www.sealey.co.uk
Web
