11
© Sealevel Systems, Inc. 3543 Manual | SL9119 9/2022
Physical Installation
Extreme care should be taken when installing the
SIO4-104.485
to avoid causing damage to the
connectors. After the adapter is installed, connect your I/O cable to P4. Refer to Card Setup for information
on setting the address and jumper options before inserting the
SIO4-104.485
onto the stack.
Do not install the Adapter in the machine until the software has been fully installed.
1.
Turn off PC power. Disconnect the power cord.
2.
Remove the case cover (if applicable).
3.
Gently insert the
SIO4-104.485
connector noting proper key orientation of the expansion
connector on a PC/104 compatible card. The
SIO4-104.485
adapter is keyed per the
current PC/104 Specification. This will aid in preventing the adapter from being inserted
incorrectly.
4.
Mounting hardware (nylon stand-offs and screws) is provided to ensure a good mechanical
connection. Retain any mounting hardware not used to allow for future expansion.
5.
Replace the cover.
6.
Connect the power cord and power up the machine.
The
SIO4-104.485
is now ready for use.
.
