©Sealevel Systems, Inc.
2107 Manual
17
SL9218 05/2011
1.
To install the driver executable from the Sealevel disk, browse the Sealevel Systems disk for:
Software\SeaCOM\Windows\SeaCOM Installer.exe
2.
If you are using Windows Vista or newer operating systems,
right
click on the installer
executable and choose ‘Run as Administrator’. If you are using an operating system prior to
Windows Vista, double click on the executable to launch the InstallShield and initiate the
driver installation.
3.
Please refer to step six above in the
Disk Installation
section and follow the remaining
installation steps.
1.
To obtain the most current software driver package from Sealevel’s website, download from
here:
2.
Choose the link for the target operating system and click on the ‘Download File’ link to
download the current driver.
3.
Once downloaded
,
if you are using Windows Vista or newer operating systems,
right
click on
the installer executable and choose ’Run as Administrator’. If you are using an Operating
system prior to XP, double click on the executable to launch the InstallShield and initiate the
driver installation.
4.
Please refer to step six above in the
‘
Disk Installation’
section and follow the remaining
installation steps.
1.
Download the current driver using the Instructions from the ‘Downloaded Software
Installation’
section above. Please take note of the destination directory it will save to.
2.
Uninstall the currently loaded driver SeaCOM driver found in the Control Panel. Prior to
Windows Vista SeaCOM will be populated in ‘Add/Remove Programs’ list. In Vista and newer
OSs it will be found in the ‘Programs and Features’ list.
3.
Navigate to the Device Manager and remove the Sealevel adapter by right clicking on the line
item choosing ‘Uninstall’. Depending on your product, it can be found under either
‘Multiport Serial adapters’ or ‘Universal Serial Bus controllers’.
4.
Single port ISA cards and PCMCIA cards will need to be uninstalled under ‘Ports (COM &
LPT)’.
5.
In the Device Manager under ‘Action’, choose ‘Scan for Hardware changes’. This will prompt
the installation of the adapter and associate it with the newly installed SeaCOM driver.
