©Sealevel Systems, Inc.
SL9222 07/2011
Relio R5200 Manual
35
The video interface is provided on a standard 15-pin DB15 connector commonly used for
connecting to analog CRT or LCD displays. The R5200 can drive the display with a maximum
resolution of 2048 x 1536 @ 75Hz. The pinout for the DB15 connector is shown below.
PIN# SIGNAL
DESCRIPTION
1
RED
This is the Red analog output signal to the display.
2
GREEN
This is the Green analog output signal to the display.
3
BLUE
This is the Blue analog output signal to the display.
4
N/C
Not connected
5
GND
Digital Ground
6
AGND
Analog Ground
7
AGND
Analog Ground
8
AGND
Analog Ground
9
+5V
Digital Display C5V
10
GND
Digital Ground
11
N/C
Not connected
12
DDC DAT Digital Display Channel Data – Used for identifying the type of connected display.
13
HSYNC
Horizontal Sync – This signal is used for the digital horizontal sync output to the display.
14
VSYNC
Vertical Sync – This signal is used for the digital vertical sync output to the display.
15
DDC CLK Digital Display Channel Clock – Used for setting the communication clock for DDC.
The shaded area denotes grounds.
