SeaLevel R5120 User Manual Download Page 6

Page: 6 / 71

R5120 & R5140 Manual | SL9212 10/2021

Before You Get Started

What’s Included

The Relio is shipped with the following items. If any of these items is missing or damaged, please contact
Sealevel for replacement.



Relio R5100 Series Fanless Core 2 Duo Computer

R5120 includes 2GB RAM

R5140 includes 4GB RAM



100-240V AC to 19VDC Desktop Power Supply



US Power Cord for Desktop Power Supply



Mounting Brackets with Enclosure Mounting Hardware



PS/2 ‘Y’

-cable for PS/2 Mouse/Keyboard



Remote Power On/Off Cable

Advisory Conventions

Warning

The highest level of importance used to stress a condition where damage could result to the product, or
the user could suffer serious injury.

Important

The middle level of importance used to highlight information that might not seem obvious or a situation
that could cause the product to fail.

Note

The lowest level of importance used to provide background information, additional tips, or other non-
critical facts that will not affect the use of the product.

Summary of Contents for R5120








































































Search results

Summary of Contents for R5120

Reviews:

Related manuals for R5120

Brands by name

Popular brands

SeaLevel R5120, User Manual

Search results

Summary of Contents for R5120

Reviews:

Related manuals for R5120

Brands by name

Popular brands