©Sealevel Systems, Inc.
HUB7i Manual
7
SL9178 05/2012
Windows 98/ME/2000/XP/Vista/7™ Operating Systems
1.
The HUB7i is fully supported as a generic USB hub device in WINDOWS
98/ME/2000/XP/VISTA/7™ operating systems and requires no separate driver. The
Sealevel Software CD is included only for distribution of the user manual and other
literature.
2.
Simply connect the included wall-mount power supply to the HUB7i and then connect to
an AC outlet.
3.
Using the included USB device cable, plug the HUB7i into an available USB port on your
host system.
4.
The ‘Found New Hardware’ screen will appear and the hub will be automatically
recognized as a generic USB hub device.
5.
The hub is ready to use when you see the screen ‘Your USB hub is installed and ready to
use.’
Windows NT is not USB aware and thus cannot support this device
Linux Support
USB devices are supported in Linux kernel v2.4 or better. Refer to the help files included with
your Linux distribution for specific instructions on adding generic USB hub devices.
