SeaLevel HUB4P, User Manual, Page: 8 / 23

©Sealevel Systems, Inc. HUB4P Manual 8
SL9185 02/2012
Internal USB Cable for 1x4 2mm Box Headers, 14” (Item# CA383)
This cable is perfect for adding Sealevel I/O modules to
small embedded systems. One end of the cable has a 1x4
2mm Molex connector for internal connections to Sealevel
embedded USB products. The other end of the cable has a
1x4 2mm box header connector found on very small
motherboards, including EPIC, 3.5" Biscuit, ETX, Nano ITX,
Pico ITX, and PC/104 Small Board Computers. The CA383
is 14" in length and uses one USB port connection on the
computer motherboard.
Internal USB Cable for 2mm Molex Connectors, 14” (Item# CA382)
The CA382 is an embedded USB cable that has a 1x4
2mm Molex connector on both ends for internal
connections to Sealevel embedded USB products. The
CA382 is 14" in length.
Low Profile PCI Bracket with Locking USB Port (Item# SL-LPCI)
The SL-LPCI easily adds a SeaLATCH locking USB port to
any computer with an available low profile PCI location
and provides a clean, professional installation.
PCI Bracket with Locking USB Port (Item# SL-PCI)
The SL-PCI easily adds a SeaLATCH locking USB port to
any computer with an available PCI location and provides
a clean, professional installation.
PCI Bracket with Dual Locking USB Ports (Item# SL-PCI2)
The SL-PCI2 easily adds two SeaLATCH locking USB ports
to any computer with an available PCI location and
provides a clean, professional installation.