Installation & Configuration
Software Installation
Windows 2000/XP/Vista™ Operating Systems
Do not install the adapter until the software has been
successfully installed..
Note: SeaMAC V4 is only supported under 32-bit versions of Windows 2000,
XP, and Vista operating systems.
1.
Start Windows.
2.
Insert the Sealevel Systems CD in your CD drive.
3.
If ‘Auto-Start’ is enabled for this drive the software will automatically launch.
Otherwise launch the ‘autorun.exe’ file located in the root directory of the CD.
4.
Click the ‘Install’ button.
5.
Type in or select the part number for the adapter from the listing.
6.
The setup files will automatically detect the operating environment and install the
proper components. Follow the information presented on the screens that follow.
7.
IN Windows XP, a screen may appear with the declaration: “The publisher
cannot be determined due to the problems below: Authenticode signature not
found.” Please click the ‘Yes’ button and proceed with the installation. This
declaration simply means that the operating system is not aware of the driver
being loaded. It will not cause any harm to your system.
8.
During setup, the user may specify installation directories and other preferred
configurations. This program also adds entries to the system registry that are
necessary for specifying the operating parameters for each driver. An uninstall
option is also included to remove all registry/INI file entries from the system.
9.
The software is now installed and you can proceed with the hardware
installation.
© Sealevel Systems, Inc.
- 3 -
ACB-MP+4.PCI User Manual
