SeaLevel 7803 User Manual Download Page 18

                                                                                                                               

               

                                                                             

 

 

18 

 
         © Sealevel Systems, Inc. 

7803 Manual   |  SL9067  9/2021 

 

Warranty 

Sealevel's  commitment  to  providing  the  best  I/O  solutions  is  reflected  in  the  Lifetime  Warranty  that  is 
standard on all Sealevel manufactured I/O products. We are able to offer this warranty due to our control 
of manufacturing quality and the historically high reliability of our products in the field. Sealevel products 
are designed and manufactured at its Liberty, South Carolina facility, allowing direct control over product 
development, production, burn-in and testing. Sealevel achieved ISO-9001:2015 certification in 2018. 

Warranty Policy 

Sealevel  Systems, Inc.  (hereafter "Sealevel") warrants that the  Product shall  conform to and perform in 
accordance  with  published  technical  specifications  and  shall  be  free  of  defects  in  materials  and 
workmanship for the warranty period. In the event of failure, Sealevel will repair or replace the product at 
Sealevel's sole discretion. Failures resulting from misapplication or misuse of the Product, failure to adhere 
to any specifications or instructions, or failure resulting from neglect, abuse, accidents, or acts of nature 
are not covered under this warranty.  

Warranty service may be obtained by delivering the Product to Sealevel and providing proof of purchase. 
Customer agrees to ensure the Product or assume the risk of loss or damage in transit, to prepay shipping 
charges  to  Sealevel,  and  to  use  the  original  shipping  container  or  equivalent.  Warranty  is  valid  only  for 
original purchaser and is not transferable.  

This  warranty  applies  to  Sealevel  manufactured  Product.  Product  purchased  through  Sealevel  but 
manufactured by a third party will retain the original manufacturer's warranty.  

Non-Warranty Repair/Retest

 

Products returned due to damage or misuse and Products retested with no problem found are subject to 
repair/retest charges. A purchase order or credit card number and authorization must be provided in order 
to obtain an RMA (Return Merchandise Authorization) number prior to returning Product.  

How to obtain an RMA (Return Merchandise Authorization) 

If you need to return a product for warranty or non-warranty repair, you must first obtain an RMA number. 
Please contact Sealevel Systems, Inc. Technical Support for assistance: 

Available  

Monday 

 Friday, 8:00AM to 5:00PM EST 

Phone   

864-843-4343  

Email 

 

[email protected]

 

Trademarks 

Sealevel Systems, Incorporated acknowledges that all trademarks referenced in this manual are the service 
mark, trademark, or registered trademark of the respective company.  

Summary of Contents for 7803



















Reviews: