8
© Sealevel Systems, Inc. 7406e Manual | SL9252 10/2022
Software Installation
Windows Installation
Do not connect the hardware until the software has been fully installed
.
Only users running Windows 7 or newer should utilize these instructions for accessing and
installing the appropriate
driver via Sealevel’s website
. If you are utilizing an operating system
prior to Windows 7, please contact Sealevel by calling 864.843.4343 or emailing
to receive access to the proper driver download and installation
instructions.
1.
Begin by locating, selecting, and installing the correct software from the
2.
Type in or select the part number (#
7406e
) for the adapter from the listing.
3.
Select “Download Now” for SeaCOM for Windows.
4.
The setup files will automatically detect the operating environment and install the proper
components. Follow the information presented on the screens that follow.
5.
A screen may appear with text similar to: “The publisher cannot be determined due to the
problems below: Authenticode signature not found.” Please click the ‘Yes’ button and
proceed with the installation. This declaration simply means that the operating system is
not aware of the driver being loaded. It will not cause any harm to your system.
6.
During setup, the user may specify installation directories and other preferred
configurations. This program also adds entries to the system registry that are necessary
for specifying the operating parameters for each driver. An uninstall option is also included
to remove all registry/INI file entries from the system.
7.
The software is now installed, and you can proceed with the hardware installation.
All
Sealevel Systems software drivers have been fully tested by Sealevel. Clicking ‘OK’ will not
harm your system.
This is a notification that if you are upgrading from a previous driver version, you should remove
the associated Device Manager hardware entries and reinstall the adapter after the installing the
SeaCOM software.
To install Sealevel software, you must log in as an administrator or have administrator privileges
in Windows.
8.
The setup file will automatically detect the operating environment and install the proper
components. Next follow the information presented on the screens that follow. Once the
installation is complete, close the disk installation window.
9.
Refer to the Physical Installation section to connect and install your adapter.
