11
© Sealevel Systems, Inc.
4021 Manual | SL9154 11/2021
Installation
Hardware Installation
The
ACB 56
can be installed in any of the PC expansion slots, but to access the ‘AT’ or (E)ISA IRQ’s (10, 11,
12, 15) it must be installed in one of the 16 bit slots. The
ACB 56
contains several jumper straps for each
port which must be set for proper operation prior to installing the card into the computer.
Do not install the Adapter in the machine until the software has been fully installed.
1.
Turn off PC power. Disconnect the power cord.
2.
Remove the PC case cover.
3.
Locate an available slot and remove the blank metal slot cover.
4.
Gently insert the
ACB 56
into the slot. Make sure that the adapter is seated
properly.
5.
Replace the cover.
6.
Connect the power cord.
Installation is complete.
Cabling Options
The
ACB 56
has a number of cabling options available. These options include:
•
CA-103
- This cable provides a high quality shielded cable with the V.35 mechanical specification
met on one end and a DB-25S (female) on the other end. V.35 has a mechanical specification that
is impossible to place on a PC bracket and requires this adapter cable.
•
CA-104
- This cable provides a 6
′
extension for use with RS-232 and V.35.
