Hardware Installation
Do not connect the device to a USB port until the software has been successfully installed.
To install the 2423, plug the device into an available USB port using the supplied USB cable. The following
instructions were tested with Windows XP and may vary based on your version of Windows.
Once the device has been connected, the Found New Hardware wizard will appear first for the root hub and
then for each port that you are installing. Follow the instructions on the following page to finish installation.
The installation will repeat twice for each COM port (a total of 8 times on four port devices). This is
a limitation in the way Windows installs external serial devices.
1.
Click on ‘Install the software automatically’ followed by the ‘Next’ button.
2.
Windows will show a warning message that the hardware has not passed Windows logo testing.
Click on
‘Continue Anyway.’
All applications and drivers have been fully tested to maintain the integrity of your operating system.
Clicking on ‘Continue anyway’ will not harm your system in any way.
3.
Click on ‘Finish.’
Repeat this process for the remaining ports on the 2423.
Summary of Contents for 2423
Page 1: ...SeaLINK 4 SC User Manual 2423...
Page 23: ...Appendix E Silk Screen 2423...
