SeaLevel 12009-001-KT, User Manual

Page: 16 / 38

16
© Sealevel Systems, Inc. 12009-001-KT Manual | SL9679 10/2022
Header (J4) – Drive Voltage Level
The 3-position header (J4) is used to select the drive voltage level (3.3 V or 5 V) for the two push-pull digital
outputs (OUT1A, OUT2A). With the supplied shunt, you can short Pin 1 and Pin 2 (of J4) to produce a 5 V
drive voltage on the push-pull outputs. Alternatively, you can use the shunt to short Pin 2 and Pin 3 (of J4)
to produce a 3.3 V drive voltage on the push-pull outputs.
Reference
Designator
PIN Signal
J4
1 5V_S0
2
PUSH-PULL DIGITAL OUTPUT
SUPPLY VOLTAGE (VCC)
3 3V3_S0
Wiring Diagram for Header (J4)
Drive Voltage Level Header
(J4) Drawing
Drive Voltage Level Header (J4) Location