Seal Line BLACK CANYON DRY PACK I 65L Owner'S Manual Download Page 2

CLOSE & SEAL PACK

1

1. 

FOLD

 To properly close and seal pack, first ensure both  

  black sealing strips are wrinkle-free. Fold the top over  

 

  toward sealing strips, line up strips, and press together.

FOLD HERE

burp!

3x

2

2. 

BURP

 Hold sealing strips firmly together and push down on  

  the pack to ‘burp’ out trapped air. Fold and roll tightly at least  

  twice until black strips are no longer visible.

3

3. C

ONNECT

 Connect both side buckles and cinch down  

  to compress. Place both top straps over fold, buckle,  

  and cinch down for additional compression. 

Summary of Contents for BLACK CANYON DRY PACK I 65L

Page 1: ... the pack should be cleaned and air dried To clean wash with a soapy brush and rinse Store pack once completely dry inside and out When packing pad items with hard sharp corners to minimize wear on the fabric Keep all insect repellents and solvents from making direct contact with dry packs If contact occurs wash the pack thoroughly NOTICE No roll down closure pack from any manufacturer is 100 wate...

Page 2: ...strips and press together FOLD HERE burp 3x 2 2 BURP Hold sealing strips firmly together and push down on the pack to burp out trapped air Fold and roll tightly at least twice until black strips are no longer visible 3 3 CONNECT Connect both side buckles and cinch down to compress Place both top straps over fold buckle and cinch down for additional compression ...

Page 3: ...p for more clearance 4 Unthread long black tongue until the harness is completely detached FIG 2 1 2 3 4 1 Insert the long black tongue into the sleeve between the pack and hard plastic Lift up the end to expose the orange strip 2 Pull the yellow cord and plastic loop through the orange strip angling tip for more clearance to expose the plastic loop on the other side of the orange strip 3 Thread t...

Page 4: ...eners beneath the panel NOTE Pack comes with the waist belt attached To detach it for travel or dry bag use see instructions below DETACH WAIST BELT 2 Reach under lumbar panel to separate and detach the hook and loop fasteners beneath the panel PRO TIP Slide a narrow piece of cardboard or plastic in between panels to prevent the hook and loop fasteners from accidentally re attaching 2 Ensure webbi...

Reviews: