SUPER CHIPMUNK SIZE 55
.
Instruction Manual.
14
3) Apply 2-3 drops of thin C/A to each of the
mounting holes. Allow the C/A to cure without
using accelerator.
5) Secure the servo to the aileron hatch using
Phillips screwdriver and the screws provided
with the servo.
4) Use dental floss to secure the connection
so they cannot become unplugged.
6) Apply 1-2 drops of thin C/A to each of the
mounting tabs. Allow the C/A to cure without
using accelerator.
INSTALLING THE AILERON - FLAP SERVOS.
Servos.
Small weight.
Thread.
Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of
the mount allow the servo lead to pass through.
1) Place the servo between the mounting
blocks and space it from the hatch. Use a pencil
to mark the mounting hole locations on the
blocks.
2) Use drill bit in a pin vise to drill the mouting
holes in the blocks.
