25
www.seagullmodels.com
114mm.
With the wing attached to the fuselage, all
parts of the model installed ( ready to fly), and
empty fuel tanks, hold the model at the marked
balance point with the stabilizer level.
Lift the model. If the tail drops when you lift,
the model is “tail heavy” and you must add
weight* to the nose. If the nose drops, it is
“nose heavy” and you must add weight* to the
tail to balance.
*If possible, first attempt to balance the model
by changing the position of the receiver battery
and receiver. If you are unable to obtain good
balance by doing so, then it will be necessary
to add weight to the nose or tail to achieve the
proper balance point.
CONTROL THROWS.
Ailerons:
High Rate :
Up : 18 mm
Down : 18 mm
Low Rate :
Up : 13 mm
Down : 13 mm
Elevator:
High Rate :
Up : 20 mm
Down : 20 mm
Low Rate :
Up : 15 mm
Down : 15 mm
Rudder:
High Rate :
Right : 30 mm
Left : 30 mm
Low Rate :
Right : 25 mm
Left : 25 mm
Flap:
Mid : 25 mm
Landing : 35 mm
