SILENCE TWISTER
.
Instruction Manual.
10
Rudder servo.
Elevator servo.
Throttle servo.
THROTTLE SERVO ARM INSTALLATION.
Adjustable Servo
connector.
Servo arm.
Loctite secure.
1 PCS.
Throttle servo arm.
Elevator servo arm.
Rudder servo arm.
Install adjustable servo connector in the servo
arm as same as picture below:
SERVO ARM GEAR INSTALLATION.
Servo arm.
Metal connector.
Tie wrap.
Vent tube.
Fuel pick up tube.
Fuel fill tube.
C/A glue.
Fuel tank.
Blow through one of the lines to en-
sure the fuel lines have not become kinked
inside the fuel tank compartment. Air
should flow through easily.
A
Fuel tank.
INSTALLING THE FUSELAGE SERVOS.
1) Install the rubber grommets and brass
collets onto the throttle servo. Test fit the servo
into the aileron servo mount.
2) Secure the servos with the screws pro-
vided with your radio system.
Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of the
mount allow the servo lead to pass through.