WWW.SEAGULLMODELS.COM
29
2) Wrap the receiver and battery pack in
the protective foam rubber to protect
them from vibration.
1) Route the antenna in the antenna tube
inside the fuselage and secure it to the
bottom of fuselage using a plastic tape.
2) The last detail is to install the antenna
onto the fuselage. Use a hobby knife to
cut a slot in the top of the fuselage for the
antenna.
3) Tighten the antenna to the fuselage.
The antenna is removeable so you can in-
stall it at the flying field to prevent dam-
age in transporting.
Tighten the antenna.
Receiver.
Battery.
Battery.
INSTALLING ANTENNA - WING GUN.
Remove covering to see hole.
Epoxy.
4) Insert the wing gun onto the wing.
Epoxy.
