17
Instruction Manual.
1)
Test fit the fin and the tail gear, to make
sure that everything fits properly. When you
are happy with the fit, glue the fin permanently
in place.
2)
See below picture how to assembly the
tail-Dragger Conversion.
M3x12mm.
3)
Install the control horn on the rudder,
then hold the rudder in place and mark it where
the music wire will enter. When you are happy
with the fit, fill the hole with epoxy and use CA
to glue in the rudder hinges.
INSTALLING THE MAIN GEAR WIRES.
1) The blind nuts for securing the landing
gear are already mounted inside the fuselage.
2) Using the hardware provided, mount
the main landing gear to the fuselage.
3) Place the fuselage inverted on the work-
bench in a suitable stand. Set the landing gear
in place and use a screwdrive to secure the
landing gear to the fuselage using bolts
M4x20mm and washers. Make sure to use the
threadlock on the bolts so they don’t vibrate
loose.
M4x20mm.
