Seagull Models SEA 357, Assembly Manual

Page: 25 / 49

25
2
.
3
.
1 .
1 .
2
.
HINGING THE ELEVATORS
Glue the elevator hinges in place using
the same techniques used to hinge the ai-
lerons.
INSTALL ELEVATOR CONTROL HORN
Fiberglass control horn
ELEVATOR AND STABILIZER
INSTALLATION
With the stabilizer held firmly in place,
use a pen and draw lines onto the stabi-
lizer where it and the fuselage sides meet.
Do this on both the right and left sides
and top and bottom of the stabilizer.
1
.
Remove the stabilizer. Using the lines
you just drew as a guide, carefully remove
the covering from between them using a
modeling knife.
2 .
Epoxy