Seagull Models SEA 324Y, Assembly Manual

Page: 4 / 34

GRUMMAN F8F BEARCAT
Instruction Manual.
4
Because the size of servos difer, you
may need to adjust the size of the precut
opening in the mount. he notch in the
sides of the mount allow the servo lead to
pass through.
Place the servo between the mounting
blocks and space it from the hatch. Use
a pencil to mark the mounting hole loca-
tions on the blocks.
Use dental loss or heatshrunk tube to
secure the connection so they cannot be-
come unplugged
C/A glue
INSTALLING THE AILERON SERVOS
5 .
6 .
1 .
2 .
Use drill bit in a pin vise to drill the mout-
ing holes in the blocks.
Apply 2-3 drops of thin C/A to each of
the mounting holes. Allow the C/A to
cure without using accelerator.
1.5mm
3 .
4 .
Mininum servo spec.
Torque : 80 oz-in (5.8 kg-cm) @ 4.8V;
100 oz-in (7.2 kg-cm) @ 6.0V