PIPER CUB _
CODE SEA 87
.
Instruction Manual
12
THROTTLE SERVO ARM INSTALLATION.
When cutting through the covering to re-
move it, cut with only enough pressure
to only cut through the covering itself. Cutting
into the balsa structure may weaken it.
Draw center line.
2) Secure the servos with the screws pro-
vided with your radio system.
1) Install the rubber grommets and brass
collets onto the throttle servo. Test fit the servo
into the aileron servo mount.
Throttle servo.
Elevator servo.
Elevator servo.
Rudder servo.
Throttle servo arm.
Elevator servo .
Elevator servo .
Rudder servo .
Install adjustable servo connector in the servo
arm .
Adjustable Servo
connector.
Servo arm.
Loctite secure.
1 pcs.
pen.
INSTALLING THE HORIZONTAL
STABILIZER.
INSTALLING THE FUSELAGE SERVO.
Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of the
mount allow the servo lead to pass through.
Switch.
INSTALLING THE SWITCH.
Install the switch into the precut hole in the
side of fuselage.
