MINI MXS-R EP
Instruction Manual.
6
INSTALLING THE FUSELAGE SERVOS.
1) Install the rubber grommets and brass
collets onto the throttle servo. Test fit the servo
into the aileron servo mount.
2) Secure the servos with the screws pro-
vided with your radio system.
Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of the
mount allow the servo lead to pass through.
Rudder fiberglass
control horn.
Cut.
Elevator servo arm.
Rudder servo.
FUSELAGE SERVO ARM INSTALLATION.
Install adjustable servo connector in the servo
arm as same as picture below:
Elevator servo.
Rudder servo.
Cut.
WHEEL AND WHEEL PANTS.
1) Assembling and mounting the wheel
pants as shown below pictures.
Elevator servo arm.
Rudder servo arm.
