WWW.SEAGULLMODELS.COM
23
23
2) A scale pilot is included with this ARF.
The Seagull Pilot included fitting well
to the cockpit. (or you can order others
scale pilot figures made by Seagull fac-
tory. They are available at Seagull factory.
They are available at Seagull distributors.)
If you are going to install a pilot figure,
please use a sanding bar to sand the base of
the figure so that it is flat.
3) Position the pilot figure on the canopy
floor as show. Locate the oval shaped on the
canopy floor and remove the covering. Use
epoxy to glue this into the base of the pilot
figure and glue the cockpit panel in place
with C/A glue, please see pictures as shown.
Epoxy.
INSTALLATION PILOT AND CANOPY.
1) Locate items necessary to install pilot and
canopy.
Epoxy.
4) Position the canopy onto the fuselage.
Trace around the canopy and onto the fuse-
lage using a felt-tipped pen.
APPLY THE DECALS.
1) If all the decals are precut and ready to
stick. Please be certain the model is clean and
free from oily fingerprints and dust. Position
decal on the model where desired, using the
photos on the box and aid in their location.
