Seagull Models JU-87 STUKA GIANT SCALE, Assembly Manual

Page: 16 / 42

www.modellmarkt24.ch
JU-87 Instruction Manual.
16
INSTALLING THE FUSELAGE SERVOS.
.
Because the size of servos difer, you
may need to adjust the size of the precut
opening in the mount. he notch in the
sides of the mount allow the servo lead to
pass through.
1) Install the rubber grommets and brass
collets into all servos. Test it the servo
into the fuselage servo mount.
2) Secure the servos with the screws pro-
vided with your radio system.
hrottle servo.
THROTTLE SERVO ARM
INSTALLATION.
Install adjustable servo connector in the
servo arm as same as picture below:
Servo arm.
Adjustable servo
connector.
Loctite secure.
hrottle servo arm.
INSTALLING THE RECEIVER SWITCH.
Install the switch into the precut hole in
the side, in the fuselage.
3/32” Hole.
Trim and cut.
Epoxy.
www.modellmarkt24.ch