HARMON ROCKET III.
Instruction Manual.
10
4) Using a 1mm drill bit and the control
horns as a guide, drill the mounting holes
through the aileron halves.
5
)
Mount the control horns by inserting
the screws through the control horn bases and
aileron halves, then into the mounting
backplates. Do not overtighten the screws or
the backplates may crush the wood.
6) Thread one nylon adjustable control
horn onto each aileron control rod. Thread the
horns on until they are flush with the ends of
the control rods.
Repeat the procedure for the other
aileron servo.
Cut.
M2 lock nut.
Snap keepper.
M2 clevis.
2) Locate the two nylon control horns,
two nylon control horn backplates and two
machine screws.
Control Horn.
Mounting Screws.
Mounting Plate.
2MM x 30 MM.
3) Position the aileron horn on the bottom
side of aileron. The clevis attachment holes
should be positioned over the hinge line.
Pen.
Aileron pushrod rod.
Clevis.
