www.seagullmodels.com
3
PARTS LISTING.
FUSELAGE ASSEMBLY
!
(1) Fuselage.
!
(1) Canopy hatch.
WING ASSEMBLY
!
(1) Right wing half/ aileron.
!
(1) Left wing half/ aileron.
!
(1) Aluminium dihedral brace.
Tail section assembly
!
(1) Horizontal stabilizer/ elevator
halves.
!
(1) Rudder halves.
Some more parts.
HARDWARE PACK
COWLING
Landing gear.....
NOTE:
To avoid scratching your new aero-
plane we suggest that you cover your
workbench with an old towel. Keep a
couple of jars or bowls handy to hold
the small parts after you open the
bags.
Please trial fit all parts. Make sure you
have the correct parts and that they
fit and are aligned properly before
gluing! This will ensure proper as-
sembly as the
EP EXTRA 300
is
made from natural materials and
minor adjustments may have to be
made.
The paint and plastic parts used in
this kit are fuel proof. However, they
are not tolerant of many harsh chemi-
cals including the following: paint
thinner, cyano-acrylate glue accel-
erator, cyanoacrylate glue de-bonder
and acetone. Do not let these chemi-
cals come in contact with the colours
on the covering and the plastic parts.
TOOLS & SUPPLIES NEEDED.
!
Thick cyanoacrylate glue.
!
30 minute epoxy.
!
5 minute epoxy.
!
Hand or electric drill.
!
Assorted drill bits.
!
Modelling knife.
!
Straight edge ruler.
!
2mm ball driver.
!
Phillips head screwdriver.
!
220 grit sandpaper.
!
90° square or builder’s triangle.
!
Wire cutters.
!
Masking tape & T-pins.
!
Thread-lock.
!
Paper towels.
