3
www.seagullmodels.com
ADDITIONAL ITEMS REQUIRED.
.
Engine 33cc-40cc.
Computer radio with 7servos.
Glow plug to suit engine.
Propeller to suit engine.
Protective foam rubber for radio
system.
Silicone fuel line.
TOOLS & SUPPLIES NEEDED.
Thick cyanoacrylate glue.
30 minute epoxy.
5 minute epoxy.
Hand or electric drill.
Assorted drill bits.
Modelling knife.
Straight edge ruler.
2mm ball driver.
Phillips head screwdriver.
220 grit sandpaper.
90° square or builder’s triangle.
Wire cutters.
Masking tape & T-pins.
Thread-lock.
Paper towels.
KIT CONTENTS.
TS
1
Fuselage
2
Wing Set
3
Tail Set
4
Cowling
5
Main Landing Gear
6
Wing Tube
7
Hardware Set
8
Fiberglass Wheel Pants
9
Canopy
10 Pilot
11 Fuel Tank
Aileron control horn.
INSTALL THE AILERONS CONTROL
HORN.
1) Locate the hardware necessary to install
the control horns for the ailerons.
Fiberglass control horn
.
2)Position the Control horn on the Aileron
and use 30-minute Epoxy
Epoxy.
Install the elevator control horn using the
same method as same as the aileron control
horns.
INSTALL ELEVATOR CONTROL HORN.
Fiberglass control horn
.
