EDGE 540.
Instruction Manual.
6
2 X 12mm.
Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of
the mount allow the servo lead to pass through.
1) Install the rubber grommets and brass
eyelets onto the aileron servo.
2) Turn the wing panel right side up. Using
a modeling knife, remove the covering at servo
tray.
AILERON SERVOS - LINKAGES.
Secure the servos with the screws pro-
vided with your radio system.
Attach the micro control connector to the
servo arms. Be sure to use the lock tie but it
could free rotation .
Wing bottom.
Aileron control horn.
5) Insert aileron control horn to the aileron.
Fuselage bottom.
Aileron servo.
Aileron servo
cotrol horn slot.
