DECATHLON
Instruction Manual
10
✑
3) Position the aileron horn on the bottom
side of aileron. The clevis attachment holes
should be positioned over the hinge line as
shown below.
✑
4) Using a 1.5mm drill bit and the control
horns as a guide, drill the mounting holes
through the aileron halves.
✑
6)
Thread one clevis control horn onto
each aileron torque rod. Thread the clevis on
until they are flush with the ends of the torque
rods.
Control Horn.
Mounting Screws.
Mounting Plate.
✑
5
)
Mount the control horns by inserting the
bolts through the control horn bases and
aileron halves, then into the mounting
backplates. Thread 2 nuts onto the bolt.
Do not overtighten the nut may crush the
wood.
Clevis.
Aileron Torque rod.
Mark point.
Control horn.
