5
Instruction Manual.
Aileron control horn.
INSTALL THE AILERON CONTROL
HORN .
2 sets.
3x35mm.
1) Locate the hardware necessary to install
the control horns for the ailerons.
2) Position the control horn on the bottom of
the aileron. You will see pre-drill hole 6mm for
the horn mounting screw on the aileron.
3) Place epoxy into hole. This will harden the
threads and prevent the crews from pulling
loose.
4) Thread a control horn end with aluminum
washer, lock nut until the top edge of the end is
9mm from the vase of the horn as shown.
6mm.
ELEVATOR CONTROL HORN
INSTALLATION.
2 sets.
3x35mm.
Install the elevator control horn using the
same method as same as the aileron control
horns.
