Chapter 5
ATAPI Interface
Page 32
Seagate Travan 40 Product Manual
ANSI Version:
This field indicates the ANSI compliance level. A value of 001b
indicates compliance with SCSI Standard X3.131-1986. A value of 010b indicates
compliance with QIC-121 (SCSI-2).
TrmIOP:
Terminate I/O message is supported. The Term I/O bit shall be set to 1.
Response Data Format:
This field will have a value of 2h to indicate compliance
with the QIC-121 (SCSI-2) inquiry data format, or a value of 1h to indicate the
SCSI-1 option has been selected.
Additional Length:
This field indicates that there are 31 (1Fh) bytes following this
byte.
Sync:
The Sync bit is always set to 1, indicating the drive supports synchronous data
transfer.
Vendor Name:
Bytes 8-0Fh are set to the ASCII values for the Vendor Name per the
table below.
Product Name:
Bytes 10-1Fh are set to ASCII values for the Product Name. See the
table below.
Vendor name
( _ = space)
Product name
Drive description
“Seagate_”
“STT3401A”
Travan 40 drive
Firmware Revision Level
: Bytes 20h-23h contain Firmware Revision.
Summary of Contents for Travan 40
Page 1: ...STT2401A STT3401A Travan 40 tape drive Product Manual...
Page 8: ......
