Seagate ST9816AG, Installation Manual

Page: 19 / 28

•
Check your DOS version.
•
Reinstall the DOS system files onto the hard disc using the
SYS command (see your DOS manual).
•
Check for viruses.
During operation, the system error message, “Drive not
Ready,” appears.
•
Check all cables.
•
Check the power supply.
•
Reboot the computer and make sure the drive spins up.
When you start Microsoft Windows 3.1, you see an error
message regarding 32-bit disc access.
•
The 32-bit disc access driver supplied with Windows 3.1 does
not work with drive capacities greater than 528 Mbytes. You may
have to disable this feature to restart Windows. Seagate provides
a replacement 32-bit driver for Windows (SEG32BIT.386), which
does support high-capacity disc drives. To install this driver:
1. Start Windows, then insert your software diskette into drive A.
2. From the Program Manager menu, select Run.
3. In the command line box, type a:\stsetup.exe.
4. Follow the instructions on the screen, then enable 32-bit
disk access within the Windows Control Panel:
a. Choose the 386 Enhanced icon.
b. Choose the Virtual Memory button.
c. Choose the Change>> button.
d. Select the 32-Bit Disk Access check box.
e. Choose the OK button.
f. Choose the Restart button to restart Windows.
Marathon 810 Installation Guide, February 1996 17