Seagate Enterprise Capacity 3.5 HDD v6 Serial ATA Product Manual, Rev. B
8
2.2
Formatted capacity
*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
.
2.2.1
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to
n–1,
where
n
is
the number of
guaranteed sectors as defined above
.
See Section 5.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-bit addressing support
of drives with capacities over 137GB.
2.3
Recording and interface technology
2.4
Start/stop times
ST models
Formatted capacity*
Guaranteed sectors
Bytes per logical sector
ST10000NM0006,
ST10000NM0056
10TB
2,441,609,216
4096
ST8000NM0006,
ST8000NM0056
8TB
1,953,506,646
ST10000NM0016,
ST10000NM0046
10TB
19,532,873,728
512
ST8000NM0016,
ST8000NM0046
8TB
15,628,053,168
Note
LBA Counts for drive capacities greater than 8TB are calculated based upon the SFF-8447 standard publication.
ftp://ftp.seagate.com/sff/SFF-8447.PDF
Interface
Serial ATA (SATA)
Recording method
Perpendicular
Recording density, KBPI (Kb/in max)
2230
Track density, KTPI (ktracks/in avg)
386
Areal density (Gb/in
2
avg)
867
Spindle speed (RPM) (± 0.2%)
7200
Internal data transfer rate (Mb/s max)
2695
Sustained data transfer rate (MiB/s max)
243
I/O data-transfer rate (MB/s max)
600 (Ultra DMA mode 5)
Power-on to Ready (sec) (typ/max)
20/30
Standby to Ready (sec) (typ/max)
20/30
Ready to spindle stop (sec) (max)
20
