Seagate Laptop SSHD SATA Product Manual, Rev. M
9
Drive Specifications
Relative humidity gradient
30% per hour max
Wet bulb temperature (max)
37.7°C max (operating)
40.0°C max (nonoperating)
Altitude, operating
–304.8 m to 3048 m (–1000 ft to 10,000+ ft)
Altitude, nonoperating
(below mean sea level, max)
–304.8 m to 12,192 m (–1000 ft to 40,000+ ft)
Operational Shock
350 Gs at 2 ms max
Non-Operational Shock
1000 Gs at 1 ms max
Vibration, operating
5–200 Hz: 2.0 Gs
201–500 Hz: 1.0 Gs
Vibration, nonoperating
5–500 Hz: 5.0 Gs
Nonrecoverable read errors
1 per 10
15
bits read
Annualized Failure Rate (AFR)
1%
Rated workload
Average annualized workload rating: <55 TB/year.
The AFR specification for the product assumes the I/O workload does not exceed the aver-
age annualized workload rate limit of 55 TB/year. Workloads exceeding the annualized rate
may degrade the product AFR and impact reliability as experienced by the particular
application. The average annualized workload rate limit is in units of TB per calendar year.
Warranty
To determine the warranty for a specific drive, use a web browser to access the following
web page:
http://www.seagate.com/support/warranty-and-replacements/
From this page, click on the “Is my Drive under Warranty” link. Users will be asked to pro-
vide the drive serial number, model number (or part number) and country of purchase.
The system will display the warranty information for the drive.
Load-unload cycles
600,000 at 25°C, 50% rel. humidity
Supports Hotplug operation per the
Serial ATA Revision 3.2 specification
Yes
1.
One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.
Table 1
Drive Specifications Summary (continued)
Drive Specification
ST1000LX000
ST1000LX001
ST1000LM014,
ST1000LM015
ST1000LM028
ST750LM000
