manualshive.com logo in svg

Seagate ST600MP0074, Product Manual

Share
Download
Seagate ST600MP0074 Product Manual Download Page 2

©2007, Seagate Technology LLC  All rights reserved.

 

Publication number: 100407739, Rev. B

 

March 2007

Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC 
in the United States and/or other countries. Savvio, SeaTools and SeaTDD are either trademarks or regis-
tered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or 
other countries. All other trademarks or registered trademarks are the property of their respective owners.

One gigabyte, or GB, equals one billion bytes when referring to hard drive capacity. Accessible capacity 
may vary depending on operating environment and formatting. Quantitative usage examples for various 
applications are for illustrative purposes. Actual quantities will vary based on various factors, including file 
size, file format, features and application software. Seagate reserves the right to change, without notice, 
product offerings or specifications.

Summary of Contents for ST600MP0074























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands