Seagate Enterprise Performance 10K HDD v9 Product Manual, Rev. D (Draft 2)
53
[1]
Seagate Enterprise Performance 10K HDD drives can format to 512, 520 528 (512 emulation) or 4096, 4160 or 4224 (4096
native).
[2]
Warning.
Power loss during flash programming can result in firmware corruption.
This usually makes the drive inoperable.
[3]
Reference Mode Sense command 1Ah for mode pages supported.
[4]
Y = Yes. Command is supported.
N = No. Command is not supported.
A = Support is available on special request.
[5]
Approximately 1.5 increase in time to complete this command for a SED drive versus a non-SED drive of the same capacity.
[6]
Write alignment counters supported.
Write and Verify (12)
AEh
N
Write and Verify (16)
8Eh
Y
Write and Verify (32)
7Fh/000Ch
Y (Type 2 PI only)
Write Buffer (modes 0, 2, supported)
3Bh
Y (non-SED drives only)
Write Buffer
3Bh
Firmware Download option (modes 5, 7, Dh and Fh)
Y (non-SED drives only)
Firmware Download option (modes 4, 5, 7)
Y (SED drives only)
Write Long (10)
3Fh
Y
Write Long (16)
9Fh/11h
Y
Write Same (10) [5]
41h
Y
PBdata
N
LBdata
N
Write Same (16) [5]
93h
Y
Write Same (32)
7Fh/000Dh
Y (Type 2 PI only)
XDRead
52h
N
XDWrite
50h
N
XPWrite
51h
N
Table 9
Supported commands
Command name
Command code
Supported
