background image

S

EAGATE 

U

LTRA 

M

OBILE 

SSHD P

RODUCT 

M

ANUAL

, R

EV

. D

  10

 D

RIVE 

S

PECIFICATIONS 

2.8

E

NVIRONMENTAL 

S

PECIFICATIONS

This section provides the temperature, humidity, shock, and vibration specifications for Seagate Ultra Mobile SSHD drives.

Ambient temperature is defined as the temperature of the environment immediately surrounding the drive.

Above 1000 feet (305 meters), the maximum temperature is derated linearly by 1°C every 1000 feet. 

2.8.1

Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. 

Shock may be applied in the X, Y, or Z axis.

2.8.1.1

Operating shock

These drives comply with the performance levels specified in this document when subjected to a maximum operating shock 

of 400 Gs based on half-sine shock pulses of 2ms. Shocks should not be repeated more than one time per axis

2.8.1.2

Nonoperating shock

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in 

performance when subsequently put into operation is 800 Gs based on a nonrepetitive half-sine shock pulse of 2 ms 

duration. 

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in 

performance when subsequently put into operation is 1000 Gs based on a nonrepetitive half-sine shock pulse of 1 ms 

duration.

Table 5: Environmental specifications

Parameters

Operating

Non-Operating

Ambient temperature

0

°

 to 60

°

C (32

°

 to 140

°

F)

-40

°

 to 70

°

C (-40

°

 to 158

°

F)

Temperature gradient

20

°

C per hour (68

°

F per hour) max, 

without condensation

35

°

C per hour (95

°

F per hour) max, 

without condensation

Humidity

5% to 95% non-condensing
(30% per hour)

5% to 95% non-condensing
(30% per hour)

Wet bulb

37.7

°

C (99.8

°

F) max

40

°

C (104

°

F) max

Altitude

-304.8m to 3048m 
(-1000ft to 10,000ft)

-304.8m to 12,192m 
(-1000ft to 40,000ft)

N

OTE

The recommended storage period:

 1 year under controlled conditions of 34°C, 90%RH or less

 90 days in uncontrolled storage conditions

Summary of Contents for ST500LX009







































Reviews: