Seagate Archive HDD Product Manual, Rev. D
3
2.0 Drive Specifications
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power.
For convenience, the phrases
the drive
and
this drive
are used throughout this manual to indicate the following
drive models:
2.1
Specification summary tables
The specifications listed in
For details on specification measurement or definition, refer to the appropriate section of this manual.
Standard
models
Self-Encrypting
(SED) models
ST5000AS0011
ST5000AS0001
Table 1
Drive specifications summary for 5TB model
Drive Specification*
ST5000AS0011 and ST5000AS0001
Formatted capacity (512 bytes/sector)*
5000GB (5TB)
Guaranteed sectors
9,767,541,168
Heads
8
Disks
4
Bytes per sector
(4K physical emulated at 512-byte sectors)
4096
Recording density, KFCI (max)
1807
Track density, KTPI (ktracks/in avg.)
455
Areal density, (Gb/in2 avg)
826
Spindle speed (RPM)
5900
Internal data transfer rate (Mb/s max)
1813
Average data rate, read/write (MB/s)
146
Sustained data transfer rate OD (MB/s max)
180
I/O data-transfer rate MB/s max)
600
ATA data-transfer modes supported
PIO modes 0–4
Multiword DMA modes 0–2
Ultra DMA modes 0–6
Cache buffer
128MB
Height (max)
26.1mm / 1.028 in
Width (max)
101.85mm /4.010 in
Length (max)
147.00mm / 5.787 in
Weight (typical)
655g (1.44 lb)
Average latency
5.1ms
Power-on to ready (sec max)
30.0
Standby to ready (sec max)
17.0
Average seek, read (ms typical)
Average seek, write (ms typical)
<12.0
<12.0
Startup current (typical) 12V (peak)
2.0A
Voltage tolerance (including noise)
5V: ± 5%
12V: ±10%
Ambient Temperature
0 to 60°C (operating)
-40 to 70°C (non-operating)
Temperature gradient (°C per hour max)
20°C (operating)
30°C (non-operating)
Relative humidity
5% to 90% (operating)
5% to 95% (non-operating)
Relative humidity gradient (per hour max)
30%
