Seagate NAS HDD +SRS Product Manual, Rev. C
22
3.4
Drive mounting
Users can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the
bottom-mounting holes. Refer to
for drive mounting dimensions. Follow these important mounting
precautions when mounting the drive:
• Allow a minimum clearance of 0.030 inches (0.76mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• The screws should be inserted no more than 0.150 inch (3.81mm) into the bottom or side mounting holes.
• Do not overtighten the mounting screws (maximum torque: 6 inch-lb).
Figure 2 Mounting dimensions (2TB and 4TB)
Temperature
Check Point
4.010 in max
101.85 mm
5.787 in max
146.99 mm
3x 0.250 ± .010 in
6.35 ± .25 mm
BOTH SIDES
1.028 in max
26.11 mm
0.680 ± .050 in
17.27 ± 1.27 mm
4.00 in
101.60 mm
1.638 in
41.61 mm
3X 6-32 UNC-2B
3 MIN THREAD DEPTH
0.15 MAX FASTENER PENETRATION
MOUNTING HOLES
BOTH SIDES
1.22 ± .020 in
30.99 ± .51 mm
0.138 in
3.51 mm
0.814 in
20.68 mm
OF CONNECTOR
DATUM B
OF DRIVE
CL
CL
TOP OF LABEL
5 TYP
1.140 ± .050 in
28.96 ± 1.27 mm
1.122
28.50
