background image

Seagate Enterprise Capacity 3.5 HDD v5 Serial ATA Product Manual, Rev. C

  8

  

*One GB equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels

.

Temperature gradient 
(°C per hour max)

20°C (operating)

30°C (non-operating)

Relative humidity

5% to 95% (operating)

5% to 95% (non-operating)

Relative humidity gradient

30% per hour max

Altitude, operating

–304.8 m to 3,048 m

(–1000 ft to 10,000+ ft)

Altitude, non-operating  
(below mean sea level, max)

–304.8 m to 12,192 m

(–1000 ft to 40,000+ ft)

Operational Shock (max at 2 ms)

Read 70 Gs / Write 40 Gs

Non-Operational Shock (max at 2 ms)

250 Gs

300 Gs

Vibration, operating

                                    5–22 Hz:       0.25 Gs, Limited displacement

22–350 Hz:    0.50 Gs

350–500 Hz:  0.25 Gs

Operation Rotational vibration

20–1500Hz: 12.5 rads/s²

Vibration, non-operating

10–500 Hz:    5.0 Grms ref

Drive acoustics, sound power (bels)

     Idle**

2.8  (typical)

3.0     (max)

     Performance seek

3.2  (typical)

3.4     (max)

Nonrecoverable read errors

1 sector per 10

15 

bits read

Annualized Failure Rate (AFR)

0.44% based on 8760 POH

Maximum Rated Workload

Maximum rate of <550TB/year. 
Workloads exceeding the annualized rate may degrade the drive MTBF and impact product reliability. The Annual-
ized Workload Rate is in units of TB per year, or TB per 8760 power on hours. Workload Rate = TB transferred * 
(8760 / recorded power on hours).

Warranty

To determine the warranty for a specific drive, use a web browser to access the following web page: 

http://www.seagate.com/support/warranty-and-replacements/

From this page, click on the “Is my Drive under Warranty” link. The following are required to be provided: the drive 
serial number, model number (or part number) and country of purchase.The system will display the warranty 
information for the drive.

Load-unload cycles 

600,000

Supports Hotplug operation per 
Serial ATA Revision 3.2 specification

Yes

Drive specification

ST6000NM0115, ST6000NM0125,
ST6000NM0175, ST6000NM0185,
ST6000NM0215, ST6000NM0265,

ST6000NM0275

ST4000NM0055, ST4000NM0085,
ST4000NM0115, ST4000NM0225,

ST4000NM0245

ST2000NM0105,

ST2000NM0125

Summary of Contents for ST4000NM0055









































Reviews: